i.
Submit all necessary and coordinated details.
j. Submit a drawing for all graphics and signage which is part of the
construction contract.
k. Submit a color rendering if required by the contract.
l. Submit architectural specifications in format provided in CD1, paragraph 16,
SPECIFICATIONS.
m. Submit lead abatement specification in format provided in CD1, paragraph
16, SPECIFICATIONS. If there is no VA master specification, develop contract
specification that is in compliance with regulations of the Environmental Protection
Agency.
2. ASBESTOS ABATEMENT
a. Where asbestos abatement is required, submit 100 percent complete
asbestos abatement drawings including:
1) Restoration of the impacted building sub-systems as an integral part of
the overall project design.
2) Integrated phasing showing how the abatement and the general
modification work will be executed.
b. Provide a major and minor summary of the square feet of floor space for all
abatement areas, the total linear and square feet of asbestos to be abated and the
total cost of abatement. Include in the cost estimate any cost for decontamination
of equipment and fixtures. Provide a copy of the above summary to the
construction cost estimator for inclusion as a separate bid item in the project
estimate.
c. Submit asbestos abatement specification in format provided in CD1,
paragraph 16, SPECIFICATIONS.
3. AUTOMATIC TRANSPORT
a. Submit 100 percent complete and coordinated automatic transport drawings.
b. Submit automatic transport systems specifications in format provided in
CD1, paragraph 16, SPECIFICATIONS.
Program Guide, PG-18-15, Volume B
Construction Documents 1
Page 44
May 2006
Previous Page
