(2) Submit interior wall elevations with exact locations of art where more
than one piece of art is on one wall. Where only one piece of art is on a wall, note
on plan the height to top of frame and horizontal distance from a given point (an
elevation is not required).
(3) Provide a draft furnishing specifications (on form provided by VA). Each
different item of furniture, art, planter, etc. shall be on a separate specification form.
All similar accessories may be on one form. Provide manufacturer description,
color/finish/fabric, unit cost breakdown, quantity, total cost, Federal Supply Schedule
information (FSC Group, Contract No., Special Item No.), ordering address,
payment address, room location of item, and code number. VA will provide code
numbers.
(4) Provide cost summary of all furnishings, window treatments, art,
accessories and plants.
4. STRUCTURAL
a. Submit drawings to scale showing tentative sizes of structural elements
including columns, beams, foundations, and slabs in major areas. The structural
drawings shall be complete enough to correlate with architectural and mechanical
b. Show sections and details so that construction features can be defined.
c. Submit completed subsurface investigation report.
5. SANITARY
a. Incorporate all comments from the previous review and submit current
design narrative.
b. Submit contract utility drawings (W-Series) at the same scale as required
for SITE DEVELOPMENT (L-Series) drawings. An exception is storm drainage
may be shown on grading and drainage drawings (L-Series). Utilities include water
(domestic, irrigation mains, and fire), fuel gas, gasoline, fuel oil, storm drainage and
sanitary sewage systems.
(1) Size water, fuel gas and fuel oil piping.
(2) Locate and size pumps, storage facilities, and treatment equipment.
(3) Show irrigation mains, submains, atypical lateral block layout, master
valves and valve concept. Indicate irrigation system zones. Describe system
Program Guide, PG-18-15, Volume D
June 1999
Page 30