C. DESIGN DEVELOPMENT 2 [DD2]
GENERAL
All value engineering shall be completed at the end of this review. No functional
changes are anticipated after this review.
1. ARCHITECTURAL
a. Submit revised floor plans at 1:100 (1/8 inch) scale that show partition
thickness, chase walls, room titles, door sizes and swings, and items previously
required. Dimension corridors and stairs. Indicate and identify fixed equipment and
wheelchair accessible facilities. Identify services or activities as for previous
submittals.
b. Indicate all fire rated partitions, smoke partitions; and lead-lined and radio-
frequency-shielded partitions.
c. Submit reflected ceiling plans for entire building indicating ceiling mounted
equipment, lighting fixtures, air diffusers, registers, tracks, etc.
d. Submit exterior elevations that have been further developed and revised per
comments from previous submittal. Show story height, penetrations, materials
architectural screens, roof enclosures, skylights, and stacks on elevations as
applicable. Show finish grades and relevant existing grades at corners, entrances,
platforms and ramps.
e. Submit 1:50 (1/4 inch) scale equipment floor plans with revisions per
comments from previous submittal. Indicate and coordinate all equipment with VA's
Equipment Guide List, Handbook 7610. Draw equipment details which are
necessary for major decisions, though complete detailing is not required for this
submittal.
f.
Show all major wall sections in outline form.
g. Submit construction details for major building components and systems,
such as window design, roofing system, special entryways, building "skin", and any
special architectural elements for the project. Complete detailing of miscellaneous
items is not required for this submission.
h. Show drafting symbols, abbreviations, and general notes. Begin drawings
for door, window and louver schedules.
i. If applicable, submit demolition plans with existing finish schedule and notes
on plan.
j.
Submit a completed finish schedule.
Program Guide, PG-18-15, Volume B
Design Development 2
May 2006
Page 33
Previous Page
