SECTION 11781
MORGUE EQUIPMENT
1.
This section provides inspection and test procedures for morgue and
associated equipment including autopsy tables and sinks.
2.
Symbols
Item Description
ME-801, ME-811, ME-812 ............Autopsy Tables
ME-813, ME-822, ME-824
ME-802 ............................Autopsy Sink
3.
INSPECTIONS AND TESTS
A.
Visual Examination:
1)
Dimensions not as specified.
2)
Assembly not complete.
3)
Parts or components missing.
4)
Parts or components do not function properly.
5)
Safety devices missing or inadequate.
6)
Material not suitable.
7)
Design not as specified.
8)
Item not in accordance with manufacturer's standard production.
9)
Finished surfaces not free of discoloration or stains.
10)
Metal thickness not as specified.
11)
Threaded fasteners broken, stripped, or fractured.
12)
Welding not type specified, incomplete, burn holes, cracked, or
fractured.
13)
Faucets and other service fixtures not type specified.
14)
Leaks at faucets, traps, sinks, and other accessories.
15)
Sinks and tables not installed level.
16)
Backsplashes not sealed to wall or adjoining surfaces as
specified.
17)
When specified, disposer does not operate as specified.
B.
Tests:
All mechanical components should be tested to determine
operability.
C.
Certification Compliance Examination:
Certifications, certified test reports,
or listing marks for codes and standards, as applicable, should be
examined and validated as proof of compliance. Conformance should be
evidence by seal, label, stamp or certified test reports.
11781-1
Previous Page
