SECTION 11416
FOOD SERVICE EQUIPMENT - UTILITY DISTRIBUTION SYSTEMS
1.
This section provides inspection and test procedures for food service
equipment utility distribution systems that are used in conjunction with
tray make-up conveyors, cafeteria serving lines and wall mounted units
for food service support equipment.
2.
Symbol
Item Description
K1071 ........Utility Distribution System with Integral Tray Slide
K1081 ........Floor Mounted Cooking Island Utility Distribution System
K1211 ........Conveyor Utility Distribution System
K1221 ........1500 mm (5 feet) Wall Mounted Utility Distribution System
K1222 ........3000 mm (10 feet) Wall Mounted Utility Distribution System
K1223 ........4500 mm (15 feet) Wall Mounted Utility Distribution System
K1224 ........6000 mm (20 feet) Wall Mounted Utility Distribution System
3.
INSPECTIONS AND TEST
A.
Visual Examination:
Examine each system for the following defects:
1)
Finish:
a)
Not as specified.
b)
Not finished where required.
c)
Scratched or marred.
d)
Edges and surfaces not smooth.
e)
Not free of discoloration or stains.
2)
Construction and Workshop:
a)
Part or component missing.
b)
Component not readily accessible for servicing where
required.
c)
Any component fractured, buckled, bent, punctured,
malformed, or damaged.
d)
Component that does not function or operate as intended.
e)
Electrical Receptacles are not interchangeable as specified.
f)
Receptacles are not of NEMA type as specified.
g)
Electrical and plumbing compartments are not separated as
specified.
h)
Status indicator lights or LED read-outs not provided as
specified.
i)
Fire-fuel shut-off for receptacles serving cooking equipment
not provided as specified.
j)
Point-of-use circuit breakers for each electrical receptacle
not provided as specified.
k)
Plumbing piping, valves, and connector assemblies not type
and material as specified.
3)
Welding:
a)
Missing, incomplete, burn holes, cracked, porous, fractured,
or otherwise not fused.
b)
Slight slag inclusion, slight undercut, not polished, not
smooth and uniform, scale or flux deposit not removed.
4)
missing, not type
Bolts, nuts, screws, and other types of threaded components
specified, broken, stripped or fractured.
11416-1
Previous Page
