C-Finished Areas
O-300 mm (12") Square
D-Latex Mastic Floors/Thin Set Tile
P-300 mm (12") Square w/Grate
E-300 mm (12") CI W/Sediment Bucket
R-200 mm (8") Square
F-Seamless Vinyl Floors
S-300 mm (12") Square w/Grate
G-Porcelain Enamel Interior w/NB
T-CRP w/Funnel
Frame and Grate
V-CI w/Funnel
L-Flushing Rim
X-CRP
H-300 mm x 150 mm (12" x 6") deep CI
Y-225 mm (9") CI W/Sediment Bucket
NOTES:
1.
Floor drains for general floor drainage are located by architect. Use
Type "C" in finished areas.
2.
Connect cooling tower drain, overflow and blowdown to sanitary sewer.
3.
Provide hub at floor level for ethylene oxide sterilizer fitting. Caulk
fitting tight in hub.
4.
Provide trap primer for all drains not receiving a direct discharge.
5.
SI conversion to English: 50 mm = 2", 80 mm = 3", 100 mm = 4".
28.
See Master Specification 15200 for base and isolator description.
Equipment Location
On Grade
6 m (20 ft.)
9 m (30 ft.)
Floor Span
Floor Span
Equipment
Base
Isol
Min.
Base
Isol
Min.
Base
Isol
Min
Type
Type
Defl
Type
Type
Defl
Type
Type
Dfl
Up to 1200 W
--
D,L,W
--
--
D,L,W
--
--
D,L,W
--
Over 1200 W
500-750 RPM
--
D
--
--
S
43
--
S
63
Over 750
--
D
--
--
S
25
--
S
43
PUMPS
Close Coupled
Up to 1200 w
--
--
--
--
D,L,W
--
--
D,L,W
--
Over 1200 w
--
--
--
I
S
25
I
S
25
Base Mounted
Up to 7500 w
--
--
--
--
D,L,W
--
--
D,L,W
--
10 kW to 30 kW
I
S
25
I
S
25
I
S
43
Over 30 kW
I
S
25
I
S
25
I
S
43
DIESEL ENGINES
Up to 19 kW
I
N
7.6
I
N
7.6
I
S
43
30