June 99
CRITERIA FOR
DEVELOPMENT OF CPM PHASING
FOR NAT IONAL CEMETERY PROJECTS
DEPARTMENT OF VETERANS AFFAIRS
1.
GENERAL:
1.1
Refer to ARCHITECTURAL DESIGN CRITERIA - DRAWINGS
(ATTACHMENT) for general requirements and classification of
drawings ("CPM-Series").
1.2
Follow this criteria and the current edition of VA Construction
Standards, VA Handbooks, VA Program Guides, and VA Master
Specifications in development of CPM phasing.
PHASING NARRATIVE (Example 1A attached): Provide a narrative to
2.
outline phasing requirements and sequence. Identify all areas of the
project as a part of some phase. Each phase description shall include
constraints particular to that phase, what other phases must precede
it, and any VA moves which must precede the start of the phase or
phases. If equipment and other removable items require storage and
relocation by the Government, these requirements shall be listed in the
phasing narrative. List special phasing constraints, which may be
common to the project, at the end of the narrative and not within each
individual phase description.
3.
PHASING PLANS:
3.1
Individual Phases: Outline and label individual phases on all the
submitted schematics and first design development plans
including site, architectural, structural, HVAC, plumbing, sanitary,
steam, and electrical drawings. NOTE: outline phases on the
submitted full size drawings. Prepare a separate set of phasing
plans (Example "1B" of phasing drawings is attached).
3.2
Engineering Systems: Design so that, upon completion of a
particular phase, VA personnel can occupy the entire area
covered by that phase with all systems functioning properly.
VA Design Guide -- National Cemetery Administration
Page 5 -19
Previous Page
