EN-06.02
Non-Illuminated Exterior Sign
Wall Mounted Building Identification
Size
Sign Face:
914 mm H x 1219 mm W
(3' 0" H x 4' 0" W)
Description
Large, non-illuminated wall
mounted sign This sign type can
be used to identify a building on
a medical center campus. It also
can be used for identification of
a stand alone building that is not
a medical center and there is not
place to install a free standing sign.
Building
Message Configuration
230
(Refer to message layout drawing
for dimensions)
Admissions
Outpatient
Message Layout A is for identifying
a non-medical center, stand alone
Rehabilitation
building.
Message Layout B and C are for
identifying building on a medical
center campus.
Graphic Process
Surface applied reflective vinyl.
Colors
Text: White T2
Background: Refer to Color Chart
Recommendations
For a stand alone non-medical
center building, use this type of
sign when there is not place to
install a free standing sign.
Use this type of sign for "titling"
Building
building entrances that have a very
230
high volume of patient and visitor
traffic and needs to be clearly
distinguished. It also can be use
Department of
on a building that is set back a
considerable distance from the
Veterans Affairs
roadway.
Position the sign adjacent the
Outpatient Center
main entrance, if possible. If the
sign is not readable in this position,
then locate on the corner of the
building.
This large sign should not be used
on small buildings or buildings with
Building
minor uses.
230
Admissions
Outpatient
Rehabilitation
Page 2-7-31
02/2005
Previous Page
