EI-06.02
Illuminated Exterior Sign
Wall Mounted Building Identification
Size
Sign Face:
914 mm H x 1219 mm W
(3' 0" H x 4' 0" W)
Description & Use
Internally Illuminated large wall
mounted sign type that can be
used to identify a building on a
medical center campus. It also
can be used for identification of
a stand alone building that is not
a medical center and there is no
place to install a free standing sign.
Message Configuration
(Refer to message layout drawing
Department of
for dimensions)
Veterans Affairs
Message Layout A is for identifying
a non-medical center stand alone
Outpatient Center
building.
Message Layout B and C are for
identifying building on a medical
center campus.
Graphic Process
Illuminated, routed out copy
backed with white translucent
acrylic.
Colors
Text: White T3
Background: Refer to Color Chart
Recommendations
For a stand alone non medical
center building, use this type of
sign when there is not place to
install a free standing sign.
Building
Use this type of sign for "titling"
230
building entrances that have a very
high volume of patient and visitor
Department of
traffic and needs to be clearly
distinguished. It also can be use
Veterans Affairs
on a building that is set back a
considerable distance from the
roadway.
Outpatient Center
Position the sign adjacent the main
entrance, if possible. If the sign
is not readable in this position,
then locate on the corner of the
building.
This large sign should not be used
Building
on small buildings or buildings with
230
minor uses.
On-off illumination of sign can
be controlled through the use of
Admissions
a timer, manual or photoelectric
Outpatient
switch. Consult with sign
fabricator at time of order for
Rehabilitation
appropriate method to use.
Page 2-6-25
02/2005
Previous Page
