EQUIPMENT GUIDE LIST - CHAPTER 278
07-02
RESEARCH AND DEVELOPMENT
SYMBOL
QNTY
ACQ/INS
DESCRIPTION
SPEC
REFERENCE
DETAIL
HOSE BIBB, COMBINATION FAUCET, 610 mm (24") OFF FLOOR, WALL
P-802
1
CC
MOUNTED, CONCEALED SUPPLY PIPES
15450
1
VV
HOSE REEL
T-10
1
CC
RACK, MOP, WALL MOUNTED
10360
NOTE: PROVIDE ONE GROUND FAULT INTERRUPTER (GFI)
AR
CC
DRAIN, FLOOR, MANUAL, FLUSH VALVE ON WALL
15400
AR
VV
CAGES
-OR-
THE FOLLOWING ENCLOSURE FOR RUNS/PENS IS MODIFIABLE TO
ACCOMMODATE VARIATIONS IN ANIMAL POPULATION, MUST BE 2.2
SM - 2.8 SM (24 - 30 SF).
ALUMINUM OR STAINLESS STEEL ANIMAL ENCLOSURE
COMPONENTS:
FRONT PANELS, WITH HORIZONTALLY SLIDING GATES, 1219 mm (48")
AR
VV
WIDE X 2134 mm (84") HIGH
DIVIDER PANELS, LOWER PORTION SHEET AND UPPER PORTION
ROD, WITH ADJUSTABLE LEGS, 1829 mm (72") LONG X 2134 mm (84")
AR
VV
HIGH
END PANELS, ALL SHEET CONSTRUCTION, WITH ADJUSTABLE
AR
VV
LEGS, 1219 mm (48") LONG X 2134 mm (84") HIGH
FLOORS, 19 mm (3/4") WIDE FLOOR MEMBER SPACED, 19 mm (3/4")
APART, TWO, 1219 mm (48") WIDE X 1219 mm (48") WIDE SECTIONS
AR
VV
REST ON ANGLES WELDED TO DIVIDER PANELS, REMOVABLE
NOTE: FLOOR MEMBERS SHOULD BE HEAVY DUTY EXPANDED
METAL, PLASTIC COATED, MOUNTED ON CROSS MEMBERS, 152 mm
(6") ABOVE FLOOR.
AR
VV
FEEDERS, STAINLESS STEEL, FOR SLIDING GATES
RESTING BOARDS, 19 mm (3/4") POLYPROPYLENE BOARD TRImmED
IN A SUITABLE MATERIAL TO PREVENT ANIMALS FROM CHEWING
ON THE BOARDS, I.E., ALUMINUM, APPROXIMATELY, 406 mm (16")
AR
VV
WIDE X 1219 mm (48") LONG, MOUNT IN REAR OF EACH RUN
Page 35