EQUIPMENT GUIDE LIST - CHAPTER 278
07-02
RESEARCH AND DEVELOPMENT
SYMBOL
QNTY
ACQ/INS
DESCRIPTION
SPEC
REFERENCE
DETAIL
SINK, MOLDED, RESIN WITH END OR CORNER DRAIN OUTLET, 635
S-3
1
CF
mm X 457 mm X 406 mm (25" X 18" X 16")
COUNTER TOP, EPOXY, RESIN, WITH DRIP GROOVE, 25 mm (1")
TOP
THICK, 762 mm (30") DEEP ALONG WALL, 1372 mm-1524 mm (54"-60")
13/13A
1
CF
DEEP WHEN IN THE CENTER ISLAND
1
VV
TABLE, BALANCE
VL53
1
VV
INCUBATOR, BACTERIOLOGICAL, 120 VOLT, 1.5 KW
1
VV
CLOCK, BATTERY OPERATED
MEDIA PREPARATION:
NOTE: EQUIPMENT FOR THIS LABORATORY IS THE SAME AS THAT
LISTED FOR THE GENERAL LABORATORIES WITH THE FOLLOWING
LABORATORIES, RADIOISOTOPE:
NOTE: THE RADIOISOTOPE LABORATORIES INCLUDE, BUT ARE NOT
LIMITED TO, THE FOLLOWING ACTIVITIES:
NOTE: EQUIPMENT FOR THIS LABORATORY IS THE SAME AS THAT
LISTED FOR THE GENERAL LABORATORIES WITH THE FOLLOWING
EXCEPTIONS:
FUME HOOD, RADIOISOTOPE, STAINLESS STEEL INTERIOR WITH
CABINET BASE, 2 EACH, WATER, AIR, GAS, VACUUM, ELECTRIC
DUPLEX OUTLETS (DEDICATED CIRCUIT) AND CUP SINKS, BASE TO
SUPPORT SUPERSTRUCTURE PLUS 91 KG (200 POUNDS) PER
H3-72
1
CC
SQUARE FOOT, 1829 mm X 914 mm
NOTE: THE FOLLOWING FUME HOOD ACCESSORIES ARE OPTIONAL:
CABINET, BASE, STEEL, SOLVENT STORAGE, VENTED INTO HOOD,
1
CC
APPROX., 559 mm X 1194 mm X 908 mm (22" X 47" X 35-3/4")
-OR-
CABINET, BASE, CORROSION RESISTING STEEL, ACID STORAGE,
1
CC
APPROX., 559 mm X 1194 mm X 908 mm (22" X 47" X 35-3/4")
FLUORESCENT MICROSCOPY ROOM:
AR
CC
DOORS AND SHADES, LIGHTPROOF
12513
COUNTER TOP, HIGH PRESSURE PLASTIC LAMINATE, ACID
RESISTANT COMPOSITION OVER PLYWOOD OR PARTICLE BOARD
TOP 6/6A
AR
CF
CORE, 32 mm (1-1/4") THICK
PEGBOARD, 32 PEGS, 508 mm X 762 mm (20" X 30") OR 53 PEGS, 813
VL54
1
CF
mm X 762 mm (32" X 30")
Page 12
Previous Page
