EQUIPMENT GUIDE LIST - CHAPTER 230
07-02
ENGINEERING SERVICE
SYMBOL
QNTY
ACQ/INS
DESCRIPTION
SPEC
REFERENCE
DETAIL
SINK, CORROSION RESISTING STEEL, SINGLE COMPARTMENT WITH
P-510
1
CC
DRAINBOARD, WALL HUNG, FOOT PEDAL CONTROL
15450
COMPRESSOR, AIR, WITH TANK, 100 PSI, 1492 W (2 HP), 208/480
1
VV
VOLT, 3 PHASE
1
VV
CLOCK, BATTERY OPERATED
FLAMMABLE STORAGE ROOM:
CABINET, FLAMMABLE LIQUID STORAGE (PAINT, ETC.) FLAMMABLE
LIQUIDS TO BE AS DEFINED IN CHAPTER I, OF FLAMMABLE AND
COMBUSTABLE LIQUIDS CODE, NFPA NO. 30, CABINET SHALL
CONFORM TO REQUIREMENTS OF PARAGRAPHS 4220 AND 4221 OF
1
VV
CHAPTER IV, OF ABOVE CODE. C
MACHINE SHOP:
DESK, DOUBLE PEDESTAL, APPROX., 1524 mm X 762 mm X 749 mm
AR
VV
(60" X 30" X 29-1/2")
AR
VV
CHAIR, ROTARY, WITH ARMS
AR
VV
CHAIR, STRAIGHT, WITHOUT ARMS
BOOKCASE, SECTIONAL, EACH SECTION, 838 mm X 330 mm X 381
AR
VV
mm (33" X 13" X 15") WITH 254 mm (10") BASE
AR
VV
BULLETIN BOARD, APPROX., 914 mm X 914 mm (36" X 36")
DESK, SHOP, METAL, WITH DRAWER AND 2 DOOR CABINET WITH
LOCKS, 876 mm X 762 mm (34-1/2" X 30"), SLOPING TOP 1092 mm
1
VV
(43"), HIGH AT FRONT, 1346 mm (53"), HIGH AT BACK
BENCH, WORK, METAL TOP WITH METAL PINCH AND VISE
1
VV
ATTACHED, 1219 mm (48") X L AS REQUIRED X 762 mm (30")
AR
VV
STOOL, WITH BACK, ADJUSTABLE HEIGHT, WITHOUT ARMS
LATHE, METAL, 3730 W (5 HP), 208 VOLT, 3 PHASE MOTOR, 1829 mm
1
VV
(72") BED, 610 mm X 2438 mm (24" X 96")
PRESS, DRILL, HEAVY DUTY, 1492 W (2 HP), 208 VOLT, 3 PHASE
1
VV
MOTOR, 1219 mm X 1219 mm (48" X 48")
MACHINE, WELDING, ELECTRIC, 208 VOLT, 78 AMP, SINGLE PHASE,
1
VV
610 mm X 914 mm (24" X 36")
MACHINE, SHARPENING, LAWN MOWER BLADE, 1119 W (1-1/2 HP)
1
VV
CAPACITOR, 120 VOLT, 20 AMP, SINGLE PHASE MOTOR
HOIST, 1814 KG (2 TON) CAPACITY, 120 VOLT, 20 AMP, ELECTRIC,
1
VV
PORTABLE, 914 mm X 1829 mm (36" X 72")
Page 13
Previous Page
