EQUIPMENT GUIDE LIST - CHAPTER 206
07-02
CANTEEN SERVICE
SYMBOL
QNTY
ACQ/INS
DESCRIPTION
SPEC
REFERENCE
DETAIL
1
CC
CONNECTIONS, UTILITIES, HOT, COLD WATER AND WASTE DRAIN
TABLE, SOILED DISH, WITH SINK, 533 mm X 533 mm (21" X 21"), WITH
RACK GUIDE FOR 508 mm X 508 mm (20" X 20"), RACKS, PRE-RINSE
SPRAY, WASTE DISPOSER AND DRAIN TROUGH, APPROX., 914 mm
X 4267 mm (36" X 168"), DISPOSER MOTOR UP, 300 BED CAPACITY
1
KC
HOSPITAL
CONNECTIONS, UTILITIES, FOR 2238 W OR 7460 W (3 HP OR 10 HP)
1
CC
MOTOR, HOT AND COLD WATER AND DRAIN
MACHINE, DISHWASHING, CONVEYOR TYPE, SINGLE, DOUBLE OR 3-
AR
KC
TANK, TYPE AS REQUIRED
CONNECTIONS, UTILITIES, FOR 187 W AND 1119 W (1/4 AND 1-1/2 HP)
MOTORS, STEAM BOOSTER, HOT WATER AND DRAIN FOR
DISHWASHING MACHINE, MEDIUM PRESSURE STEAM AND RETURN
FOR DISHWASHING MACHINE AND BOOSTER OR 76 mm (3") STUB-
1
CC
UP FOR 6 KW OR 7,000 BTU
VENT CONNECTION, TO 102 mm X 406 mm (4" X 16"), DISHWASHING
VENT COWLS EACH END AND LOCKING DAMPER IN EACH END OF
UPPER PART OF STAINLESS STEEL DUCT, 200 CFM ENTRANCE - 400
1
CC
CFM EXIT
15822
TABLE, CLEAN DISH, 762 mm X 3048 mm (30" X 120") X HEIGHT, AS
1
KC
REQUIRED
MACHINE, WASHING, POT AND PAN, SINGLE RACK WITH STEAM
KC
BOOSTER, 208/220 OR 230 VOLT, 3730 W (5 HP) OR STEAM
CONNECTIONS, UTILITIES, FOR 3730 W (5 HP) MOTOR, STEAM
BOOSTER WATER HEATER, HOT WATER AND DRAIN FOR UTENSIL
WASHER MACHINE, MEDIUM PRESSURE STEAM AND RETURN OR 76
CC
mm (3") STUB UP FOR 6 KW OR 7,000 BTU
TABLE, SOILED UTENSIL, WITH SPRAY SINK, WASTE DISPOSER AND
DRAIN TROUGH, DISPOSER MOTOR, 3730 W (5 HP), 480 VOLT, 3
KC
PHASE, APPROXIMATELY, 914 mm X 2438 mm (36" X 96")
CONNECTIONS, UTILITIES, FOR 3730 W (5 HP) MOTOR, HOT AND
CC
COLD WATER AND DRAIN
K1380
1
CC
HOOD, EXHAUST, FOR POT AND PAN WASHER
11401
TABLE, CLEAN UTENSIL, APPROXIMATELY, 914 mm X 1219 mm X
KC
HEIGHT AS REQUIRED (36" X 48" X HEIGHT AS REQUIRED)
Page 8
Previous Page
