Alteration costs shall be reported separately from the cost of
new construction.
D.
Design Development 1 (DD1): This submission shall include a
two-page VA Form HO-18c, LEVEL "B" detail and a PROJECT DATA
SHEET NO. 1 with the available items filled in for the entire
project, as well as separately for each building. A single
PROJECT DATA SHEET No. 2 containing current local labor rates
is also required. Alteration costs shall be reported
separately from the cost for new construction. Supplement
each VA Form HO-18c with VA Form HO-18a or b, which shows the
division of costs between labor and material.
E.
Design Development 2 (DD2):
(1) Provide Matrix described in Article 5; VA Form HO-18c,
COST SUMMARY SHEET, completed to level "B" detail; VA Form
HO-18b, COST ESTIMATE WORKSHEETS, to show the division of
costs between labor and material; a detailed PROJECT DATA
SHEET NO. 1 completed in its entirety with all applicable
items filled in for the entire project as well as
separately for each building; and PROJECT DATA SHEET No. 2
containing local labor rates.
(2) Alteration costs shall be reported separately from the
cost of new construction. The amount of detail provided
in this submission must be consistent with the
"LOT" should be a minimum.
(3) For proper coding beyond LEVEL "B", the A/E shall refer to
Attachment E, CODING AND UNIT OF MEASURE REFERENCE CHART.
(4) Asbestos Abatement Estimate: Show total costs for
asbestos abatement provided by the Professional Industrial
Hygienist (PIH) as a separate cost item below the total
base construction cost on the LEVEL "B" COST SUMMARY
SHEET.
F.
Construction Document 1 (CD1): This submission shall include
everything required in the DD2 Submission. It differs from
the DD2 Submission only in the level of detail required.
Provide a complete quantity survey estimate. No lump sums
will be permitted without explanation. (Note: Lump sums
shown on Attachment E, CODING AND UNIT MEASURE CHARTS, are
permitted due to summation of dissimilar items).
5